Views: 0 Author: jJinbao PVC Publish Time: 2026-02-06 Origin: Jinbao PVC
Here is how to keep your walls looking brand new for decades.
One of the primary reasons homeowners and architects choose Jinbao WPC Wall Panels is their reputation for being "low maintenance." Unlike real wood, they don't need annual staining, sealing, or painting.
However, "low maintenance" does not mean "no maintenance." Dust, accidental spills, and minor scuffs happen. This guide provides professional advice on how to care for your composite walls properly, ensuring they remain the highlight of your interior for years to come.
For 90% of situations, a simple routine is all you need. WPC is water-resistant, which makes cleaning much easier than traditional drywall or timber.
Soft Microfiber Cloth: Essential for preventing micro-scratches.
Warm Water: The universal solvent.
Mild Detergent: Dish soap or a pH-neutral general cleaner.
Soft Bristle Brush: For getting dust out of fluted (slatted) panels.
Dust First: Use a duster or a vacuum with a soft brush attachment to remove loose dust. Tip: For fluted panels, run the vacuum vertically along the grooves.
Wipe Down: Mix warm water with a drop of mild soap. Dip your microfiber cloth, wring it out until damp (not soaking), and wipe the panels gently.
Dry: Although WPC is waterproof, letting water air-dry can leave mineral streaks. Wipe dry with a clean, soft towel for a streak-free finish.
Accidents happen. Here is how to handle specific issues without damaging the surface.
Action: Act immediately. The longer a stain sits, the harder it is to remove.
Technique: Blot the stain (do not rub aggressively). Use a mild degreaser for oil spots. For stubborn ink, a small amount of isopropyl alcohol on a cloth can work, but test it in an inconspicuous area first.
For Surface Scuffs: Often, a "scratch" is just material transfer (like rubber from a shoe). A standard pencil eraser can often rub these away.
For Deeper Scratches: Use a wax repair stick or a furniture touch-up marker that matches the color of your WPC Wall Panel. Fill the scratch and buff it smooth.
To protect the decorative film and structure of your panels, avoid these common errors.
Do NOT Use | Why? | Use Instead |
Bleach / Ammonia | Can cause discoloration and damage the surface film. | Mild Dish Soap |
Abrasive Pads (Steel Wool) | Will permanently scratch the finish and dull the shine. | Microfiber Cloth |
Acetone / Strong Solvents | Can melt or warp the plastic components of WPC. | Isopropyl Alcohol (sparingly) |
Pressure Washers (Indoor) | High pressure can force water behind the panels, causing mold in the wall structure. | Hand Wiping |
Preservation is better than cure.
While high-quality WPC has UV resistance, continuous direct exposure to harsh sunlight over 10 years can cause slight fading.
Tip: Use curtains or blinds during peak sun hours if the panels are directly facing a large window.
Tip: Leave a small gap (1-2 cm) between heavy furniture (like sofas) and the wall. This prevents friction marks and allows air circulation.
If you have bought your panels but aren't installing them yet:
Tip: Store them flat on the ground, not leaning vertically against a wall. Leaning them for weeks can cause them to bow or warp before they are locked into place.
The beauty of WPC Wall Panels is that they ask for very little in return for the elegance they provide. By avoiding harsh chemicals and following a simple dusting routine, your walls will look as pristine in ten years as they did on day one.
Need to replace a damaged section or start a new project? Visit the Jinbao WPC Wall Panel Collection to find durable, easy-to-clean options for your space.
A: We do not recommend it. While WPC is heat resistant, the intense, concentrated heat and moisture from a steam cleaner could affect the adhesive of the decorative film or the joints over time. Stick to a damp cloth.
A: Mix white vinegar and water (1:1 ratio). Spray it on the area, let it sit for 5 minutes, and wipe clean. Vinegar is a natural mold killer that won't damage the WPC surface.
A: Painting should be a last resort. If a panel is severely damaged, it is often easier (and better looking) to unclip and replace the single damaged panel rather than painting the entire wall.
A: They are scratch-resistant, meaning they withstand daily wear better than wood or drywall. However, sharp objects like keys or metal tools can still scratch the surface, so care should be taken.
